By Jan Krüger (1) and Junio C Hamano (1)
* jk/maint-tformat-with-z:
log-tree: the previous one is still not quite right
log-tree: use custom line terminator in line termination mode
When checking out another commit from an already detached state, we used
to report all commits that are not reachable from any of the refs as
lossage, but some of them might be reachable from the new HEAD, and there
is no need to warn about them.
By Johannes Sixt
* js/checkout-detach-count:
checkout (detached): truncate list of orphaned commits at the new HEAD
t2020-checkout-detach: check for the number of orphaned commits
The cases "git push" fails due to non-ff can be broken into three
categories; each case is given a separate advise message.
By Christopher Tiwald (2) and Jeff King (1)
* ct/advise-push-default:
Fix httpd tests that broke when non-ff push advice changed
clean up struct ref's nonfastforward field
push: Provide situational hints for non-fast-forward errors
"git repack" used to write out unreachable objects as loose objects
when repacking, even if such loose objects will immediately pruned
due to its age.
By Jeff King
* jk/repack-no-explode-objects-from-old-pack:
gc: use argv-array for sub-commands
argv-array: add a new "pushl" method
argv-array: refactor empty_argv initialization
gc: do not explode objects which will be immediately pruned
Unlike "git rev-parse --show-cdup", "--show-prefix" did not give an
empty line when run at the top of the working tree.
By Ross Lagerwall
* rl/show-empty-prefix:
rev-parse --show-prefix: add in trailing newline
"git push" over smart-http lost progress output a few releases ago.
By Jeff King
* jk/maint-push-progress:
t5541: test more combinations of --progress
teach send-pack about --[no-]progress
send-pack: show progress when isatty(2)
"log --graph" was not very friendly with "--stat" option and its output
had line breaks at wrong places.
By Lucian Poston (5) and Zbigniew Jędrzejewski-Szmek (3)
* lp/diffstat-with-graph:
t4052: work around shells unable to set COLUMNS to 1
test-lib: skip test with COLUMNS=1 under mksh
Prevent graph_width of stat width from falling below min
t4052: Test diff-stat output with minimum columns
t4052: Adjust --graph --stat output for prefixes
Adjust stat width calculations to take --graph output into account
Add output_prefix_length to diff_options
t4052: test --stat output with --graph
When using a Perl script on a system where "perl" found on user's $PATH
could be ancient or otherwise broken, we allow builders to specify the
path to a good copy of Perl with $PERL_PATH. The gitweb test forgot to
use that Perl when running its test.
By Jeff King (1) and Zbigniew Jędrzejewski-Szmek (1)
* jk/maint-gitweb-test-use-sane-perl:
Consistently use perl from /usr/bin/ for scripts
t/gitweb-lib: use $PERL_PATH to run gitweb
"git config --rename-section" to rename an existing section into a bogus
one did not check the new name.
By Jeff King
* jk/maint-config-bogus-section:
config: reject bogus section names for --rename-section
When git checkout switches from a detached HEAD to any other commit, then
all orphaned commits were listed in a warning:
Warning: you are leaving 2 commits behind...:
a5e5396 another fixup
6aa1af6 fixup foo
But if the new commit is actually one from this list (6aa1af6 in this
example), then the list in the warning can be truncated at the new HEAD,
because history beginning at HEAD is not "left behind". This makes it so.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the test that orphans commits to leave 2 commits behind. Add a test
that leaves only one of these behind.
The next patch will truncate the list of orphaned commits earlier. With
this preliminary update, its effect will become more obvious.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Octopus merge strategy did not reduce heads that are recorded in the final
commit correctly.
By Junio C Hamano (4) and Michał Kiedrowicz (1)
* jc/merge-reduce-parents-early:
fmt-merge-msg: discard needless merge parents
builtin/merge.c: reduce parents early
builtin/merge.c: collect other parents early
builtin/merge.c: remove "remoteheads" global variable
merge tests: octopus with redundant parents
HTTP transport that requires authentication did not work correctly when
multiple connections are used simultaneously.
By Jeff King (3) and Clemens Buchacher (1)
* cb/http-multi-curl-auth:
http: use newer curl options for setting credentials
http: clean up leak in init_curl_http_auth
fix http auth with multiple curl handles
http auth fails with multiple curl handles
The report from "git fetch" said "new branch" even for a non branch ref.
By Marc Branchaud
* mb/fetch-call-a-non-branch-a-ref:
fetch: describe new refs based on where it came from
fetch: Give remote_ref to update_local_ref() as well
The parser in "fast-import" did not diagnose ":9" style references that is
not followed by required SP/LF as an error.
By Pete Wyckoff
* pw/fast-import-dataref-parsing:
fast-import: tighten parsing of datarefs
When "git fetch" encounters repositories with too many references, the
command line of "fetch-pack" that is run by a helper e.g. remote-curl, may
fail to hold all of them. Now such an internal invocation can feed the
references through the standard input of "fetch-pack".
By Ivan Todoroski
* it/fetch-pack-many-refs:
remote-curl: main test case for the OS command line overflow
fetch-pack: test cases for the new --stdin option
remote-curl: send the refs to fetch-pack on stdin
fetch-pack: new --stdin option to read refs from stdin
Conflicts:
t/t5500-fetch-pack.sh
"log -p --graph" used with "--stat" had a few formatting error.
By Lucian Poston
* lp/maint-diff-three-dash-with-graph:
t4202: add test for "log --graph --stat -p" separator lines
log --graph: fix break in graph lines
log --graph --stat: three-dash separator should come after graph lines
Giving "--continue" to a conflicted "rebase -i" session skipped a
commit that only results in changes to submodules.
By John Keeping
* jk/rebase-i-submodule-conflict-only:
rebase -i continue: don't skip commits that only change submodules
The current code runs "perl gitweb.cgi" to test gitweb. This
will use whatever version of perl happens to be first in the
PATH. We are better off using the specific perl that the
user specified via PERL_PATH, which matches what gets put on
the #!-line of the built gitweb.cgi.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The correct output would have NUL after each commit, so "-z --format=%s"
would have a single-liner subject with the line-terminating LF replaced
with NUL, and "-p/--stat -z --format=%s" would have a single-liner subject
with its line-terminating LF, followed by the diff/diffstat in which the
terminating LF of the last line is replaced with NUL, but to be consistent
with what "-p/--stat -z --pretty=format:%s" does, I think it is OK to
append NUL to the diff/diffstat part instead of replacing its last LF with
NUL.
The added test shows the update is still not right for "-p -z --format".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using a custom format in line termination mode (as opposed to line
separation mode), the configured line terminator is not used, so things
like "git log --pretty=tformat:%H -z" do not work properly.
Make it use the line terminator the user ordered.
Signed-off-by: Jan Krüger <jk@jk.gs>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, we tested only that "push --quiet --no-progress"
was silent. However, there are many other combinations that
were not tested:
1. no options at all (but stderr as a tty)
2. --no-progress by itself
3. --quiet by itself
4. --progress (when stderr not a tty)
These are tested elsewhere for general "push", but it is
important to test them separately for http. It follows a
very different code path than git://, and options must be
relayed across a remote helper to a separate send-pack
process (and in fact cases (1), (2), and (4) have all been
broken just for http at some point in the past).
We can drop the "--quiet --no-progress" test, as it is not
really interesting (it is already handled by testing them
separately in (2) and (3) above).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
You can already use relative paths in include.path, which
means that including "foo" from your global "~/.gitconfig"
will look in your home directory. However, you might want to
do something clever like putting "~/.gitconfig-foo" in a
specific repository's config file.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
mksh does not allow $COLUMNS to be set below 12. mksh(1) says that
$COLUMNS is "always set, defaults to 80, unless the value as reported
by stty(1) is non-zero and sane enough". This applies also to setting
it directly for one command:
$ COLUMNS=10 python -c 'import os; print os.environ["COLUMNS"]'
98
Add a test prerequisite by checking if we can set COLUMNS=1, to allow
us to skip tests that needs it.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The shell function that starts git-daemon wants to read the first line of
the daemon's stderr to ensure that it started correctly. Subsequent daemon
errors should be redirected to fd 4 (which is the terminal in verbose mode
or /dev/null in quiet mode). To that end the shell script used 'read' to
get the first line of output, and then 'cat &' to forward everything else
in a background process.
The problem is, that 'cat >&4 &' does not produce any output because the
shell redirects a background process's stdin to /dev/null. To have this
command invocation do anything useful, we have to redirect its stdin
explicitly (which overrides the /dev/null redirection).
The shell function connects the daemon's stderr to its consumers via a
FIFO. We cannot just do this:
read line <git_daemon_output
cat <git_daemon_output >&4 &
because after the first redirection the pipe is closed and the daemon
could receive SIGPIPE if it writes at the wrong moment. Therefore, we open
the readable end of the FIFO only once on fd 7 in the shell and dup from
there to the stdin of the two consumers.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When PATH contains an unreadable directory, alias expansion code did
not kick in, and failed with an error that said "git-subcmd" was not
found.
By Jeff King (1) and Ramsay Jones (1)
* jk/run-command-eacces:
run-command: treat inaccessible directories as ENOENT
compat/mingw.[ch]: Change return type of exec functions to int
The 'push to upstream' implementation was broken in some corner
cases. "git push $there" without refspec, when the current branch is
set to push to a remote different from $there, used to push to $there
using the upstream information to a remote unreleated to $there.
* jc/push-upstream-sanity:
push: error out when the "upstream" semantics does not make sense
"git clean -d -f" (not "-d -f -f") is supposed to protect nested
working trees of independent git repositories that exist in the
current project working tree from getting removed, but the protection
applied only to such working trees that are at the top-level of the
current project by mistake.
* jc/maint-clean-nested-worktree-in-subdir:
clean: preserve nested git worktree in subdirectories
Rename detection logic used to match two empty files as renames during
merge-recursive, leading unnatural mismerges.
By Jeff King
* jk/diff-no-rename-empty:
merge-recursive: don't detect renames of empty files
teach diffcore-rename to optionally ignore empty content
make is_empty_blob_sha1 available everywhere
drop casts from users EMPTY_TREE_SHA1_BIN
When "git commit --template F" errors out because the user did not
touch the message, it claimed that it aborts due to "empty message",
which was utterly wrong.
By Junio C Hamano (4) and Adam Monsen (1)
* jc/commit-unedited-template:
Documentation/git-commit: rephrase the "initial-ness" of templates
git-commit.txt: clarify -t requires editing message
commit: rephrase the error when user did not touch templated log message
commit: do not trigger bogus "has templated message edited" check
t7501: test the right kind of breakage
"git add -p" is not designed to deal with unmerged paths but did
not exclude them and tried to apply funny patches only to fail.
By Jeff King
* jk/add-p-skip-conflicts:
add--interactive: ignore unmerged entries in patch mode
"git commit --author=$name" did not tell the name that was being
recorded in the resulting commit to hooks, even though it does do so
when the end user overrode the authorship via the "GIT_AUTHOR_NAME"
environment variable.
* jc/commit-hook-authorship:
commit: pass author/committer info to hooks
t7503: does pre-commit-hook learn authorship?
ident.c: add split_ident_line() to parse formatted ident line
The regexp configured with diff.wordregex was incorrectly reused
across files.
By Thomas Rast (2) and Johannes Sixt (1)
* tr/maint-word-diff-regex-sticky:
diff: tweak a _copy_ of diff_options with word-diff
diff: refactor the word-diff setup from builtin_diff_cmd
t4034: diff.*.wordregex should not be "sticky" in --word-diff
Running "notes merge --commit" failed to perform correctly when run
from any directory inside $GIT_DIR/. When "notes merge" stops with
conflicts, $GIT_DIR/NOTES_MERGE_WORKTREE is the place a user edits
to resolve it.
By Johan Herland (3) and Junio C Hamano (1)
* jh/notes-merge-in-git-dir-worktree:
notes-merge: Don't remove .git/NOTES_MERGE_WORKTREE; it may be the user's cwd
notes-merge: use opendir/readdir instead of using read_directory()
t3310: illustrate failure to "notes merge --commit" inside $GIT_DIR/
remove_dir_recursively(): Add flag for skipping removal of toplevel dir
You can feed junk to "git config --rename-section", which
will result in a config file that git will not even parse
(so you cannot fix it with git-config). We already have
syntactic sanity checks when setting a variable; let's do
the same for section names.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test "pushing to local repo" in t5800-remote-helpers can hang
due to a race condition in git-remote-testgit. Fix it by
setting stdin to unbuffered.
On the writer side, "git push" invokes push_refs_with_export(),
which sends to stdout the command "export\n" and immediately
starts up "git fast-export". The latter writes its output stream
to the same stdout.
On the reader side, remote helper "git-remote-testgit" reads from
stdin to get its next command. It uses getc() to read characters
from libc up until \n. Libc has buffered a potentially much
larger chunk of stdin. When it sees the "export\n" command, it
forks "git fast-import" to read the stream.
If fast-export finishes before git fast-import starts, the
fast-export output can end up in libc's buffer in
git-remote-testgit, rather than in git fast-import. The latter
hangs indefinitely on a now-empty stdin.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Exiting from a for-loop early using '|| break' does not propagate the
failure code, and for this reason, the tests used just 'exit'. But this
ends the test script with 'FATAL: Unexpected exit code 1' in the case of
a failed test.
Fix this by moving the loop into a shell function, from which we can
simply return early.
While at it, modernize the style of the affected test cases.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using "\+" in "grep" and expecting that it means one or more
is a GNUism. Spell it in a dumb and portable way.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is used by "git pull" to construct a merge message from list of
remote refs. When pulling redundant set of refs, however, it did not
filter them even though the merge itself discards them as unnecessary.
Teach the command to do the same for consistency.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When COLUMNS or --stat-width restricts the diff-stat width to near the
minimum, 26 columns, the graph_width value becomes negative. Consequently, the
graph part of diff-stat is not resized properly.
Signed-off-by: Lucian Poston <lucian.poston@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
